LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1997 >> 3.0CL >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor >> Removal & Installation

Removal & Installation

  1. Mark spark plug wires, distributor housing and cylinder head for installation reference. Disconnect distributor 3-pin connector and spark plug wires. Remove hold-down bolts and distributor.
  2. Ensure No. 1 piston is set to compression stroke TDC. Using clean engine oil, lubricate and install NEW "O" ring. See Fig 1. Install distributor, aligning distributor coupling with slot in camshaft. Connect wiring. Tighten mounting bolts. See TORQUE SPECIFICATIONS .
    Fig 1: Identifying Distributor Components
    G97H06048Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals