LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1996 >> Integra LS, 2D Coupe, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (1.8L 4-CYL - VTEC - GS-R) >> Overhaul >> Cylinder Block Assembly >> Piston Pin Installation

Piston Pin Installation

WARNING: This page is about a different variant/trim than selected.
  1. Ensure piston and connecting rod are positioned so arrow on top of piston is toward timing belt and numbers marked on connecting rod face timing belt. Turn handle on Piston Pin Driver (07973-PE00320) so piston driver length is 2.035" (51.69 mm).
  2. Install Pilot Collar (07LAF-PR30100) into piston and connecting rod. Lightly oil new piston pin. Place piston onto base. Press in piston pin.
scientia non olet · About LEMON Manuals