LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1996 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Steering Lock Assembly >> Removal & Installation

Removal & Installation

  1. Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM. Remove lower dashboard panel and left knee bolster. Remove upper and lower steering column covers. Unplug connectors from ignition switch.
  2. Remove steering column mounting bolts/nuts. Lower steering column assembly. Center-punch both shear bolts. Using a 3/16" bit, drill heads from bolts. Remove shear bolts and lock assembly.
  3. Install new switch without key inserted. Finger-tighten new shear bolts. Insert key. Check for proper operation. Tighten shear bolts until heads break off. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals