LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1996 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VTEC - GS-R >> Overhaul >> Cylinder Block Assembly >> Fitting Pistons

Fitting Pistons

  1. Using a feeler gauge, measure piston-to-cylinder bore clearance. If clearance is near or exceeds 0.002" (0.05 mm), measure each piston and cylinder. If piston clearance exceeds service limit, re-bore cylinder and install oversize piston.
  2. Measure piston diameter at a point 0.6" (15 mm) from bottom of piston skirt. If diameter is not within specification, replace piston. See PISTONS, PINS & RINGS  under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals