LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1996 >> 3.5RL >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Component Testing >> Wiper Motor Relay Test

Wiper Motor Relay Test

  1. Relay is located in underhood relay box. Turn ignition off. Disconnect relay harness connector and remove relay from relay box.
  2. Using an ohmmeter, ensure continuity exists between relay terminals No. 1 and 3. See WIRING DIAGRAM  . Continuity should not exist between terminals No. 4 and 5.
  3. Using fused jumper wires, apply battery voltage and ground between relay coil terminals No. 1 and 3. Continuity should now exist between terminals No. 4 and 5. Replace relay if continuity is not as specified.
scientia non olet · About LEMON Manuals