LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1995 >> Legend SE >> Repair and Diagnosis >> Steering >> Steering Column >> Driver's Position Memory System >> Self-Diagnostic System >> Retrieving Trouble Codes

Retrieving Trouble Codes

  1. Turn ignition off. Press MEMO button and both position setting buttons on memory switch and hold them down. Turn ignition on and wait at least one second. Release all buttons.
  2. If no trouble codes are stored, position setting button LEDs will only blink one 3-second long blink. If trouble codes are stored, position setting button LEDs will blink one, two or three one-second long flashes. This is the first digit of the trouble code.
  3. After the first digit is flashed, a one second pause takes place. The second digit is displayed by 1/4-second flashes of the position setting button LEDs. Each trouble code is followed by a 3 second pause before any other codes are displayed. Record all trouble codes and see appropriate flow chart to locate cause of problem. See DIAGNOSTIC TROUBLE CODE DEFINITIONS  table.
scientia non olet · About LEMON Manuals