LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1995 >> Legend L, 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Idle Control System >> Engine Controls - System/Component Tests >> Starter Signal

Starter Signal

Connect ECM test harness between ECM and ECM connectors. Check voltage on ECM test harness terminals C11 (positive) and A26 (negative) with ignition switch in ON position. See Figure . If battery voltage exists, starter signal is okay. If voltage does not exist, inspect fuse No. 14. If fuse is okay, repair open in Black/White wire between ECM and fuse No. 14.

scientia non olet · About LEMON Manuals