LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1994 >> NSX Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Controls - Self-Diagnostics) >> Self-Diagnostic System >> Testing Procedure

Testing Procedure

WARNING: This page is about a different car, the 1992 Acura NSX and 1991 Acura NSX. However, it is still accessible from the selected car via links, so may be relevant.

When the Check Engine light has been reported on, connect the Service Check Connector terminals with a jumper wire as shown (the Service Check Connector is located under the dash on the passenger side of the car). See Figure . Turn the ignition switch ON. Note the Diagnostic Trouble Code (DTC). Troubleshoot as necessary. After troubleshooting, remove the jumper wire. If the Service Check Connector is jumped the Check Engine light will stay on. Reset the ECU. Set the radio station presets and the clock.

scientia non olet · About LEMON Manuals