Test B: Left Inoperative
- Connect the YEL/BLK terminal to the YEL/RED terminal and the YEL/WHT (or YEL/BLK) terminal to the body ground with jumper wires. See Figure . The left mirror should tilt down (or swing left) when the ignition switch is turned ON.
- If the mirror does not tilt down (or does not swing left), remove the left door trim panel and check for open in the YEL/WHT (or YEL/BLK) wire between the left door mirror and switch. If the wire is OK, check the left door mirror. See DOOR MIRROR TEST under COMPONENT TESTS.
- If the mirror neither tilts down nor swings left, repair the YEL/RED wire. If the mirror operates properly, check the mirror switch. See SWITCH TEST under COMPONENT TESTS.