LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1994 >> Legend GS, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Traction Control System >> Diagnosis >> Diagnostic System >> Retrieving Codes

Retrieving Codes

  1. Turn ignition on, with engine off. Ensure TCS light comes on. If TCS light does not come on, go to TCS LIGHT DOES NOT COME ON under TROUBLE SHOOTING. Turn ignition off.
  2. Locate 2-pin self-diagnostic connector at passenger-side toe board. Install a jumper wire between White and Black wires of self-diagnostic connector. Turn ignition on, but do not start engine. TCS light should start flashing any stored code(s). If TCS light stays on and trouble code(s) are not flashes, go to TCS LIGHT DOES NOT GO OFF under DIAGNOSIS.
  3. A long (1.2 second) flash indicates main digit of DTC, and short flash (0.3 second) indicates sub digit of DTC. For trouble code identification, see TCS TROUBLE CODE IDENTIFICATION table.
scientia non olet · About LEMON Manuals