LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1993 >> Vigor LS, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis - MPWA >> Component Testing >> Shift Lock Solenoid

Shift Lock Solenoid

  1. Remove center console. Disconnect 2-pin connector from main wiring harness and note terminal identification. See Fig 1 .
    CAUTION: During step 2) test procedure, battery voltage must be applied to correct shift lock solenoid terminals or diode inside shift lock solenoid will be damaged.
  2. Momentarily connect battery positive terminal to terminal "A" and battery negative terminal to terminal "B". Ensure shift lock solenoid operates with battery voltage applied. Replace shift lock solenoid if solenoid fails to operate.
Fig 1: Identifying Shift Lock Solenoid Connector Terminals
G93C23772Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals