LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1993 >> Vigor LS, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Retrieving Codes

Retrieving Codes

  1. Turn engine off. Turn ignition on. Ensure ANTI-LOCK warning light comes on. Start engine and check ANTI-LOCK warning light. If warning light goes out, no fault codes exist.
  2. If warning light stays on, turn engine off. Turn ignition on, but DO NOT start engine. Record LED blinking sequence on control unit.
  3. First number of code indicates main code. See Fig 1 . Second number indicates sub code. An approximate 10-second delay should occur before LED starts blinking after ignition is turned on. Total of 3 codes can be set at one time. To recheck sequence, turn ignition off for a few seconds and then turn ignition back on.
Fig 1: Explaining LED Code
G58217Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals