LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1993 >> Integra GS-R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (1.8L 4-CYL) >> Overhaul >> Piston Pin Inspection

Piston Pin Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Measure diameter of piston pin. Measure diameter of piston pin bore in piston. Piston pin clearance is difference between the two measurements.
  2. Piston pin clearance must be 0.0004-0.0009" (0.010-0.022 mm). If piston pin clearance is greater than 0.0009" (0.022 mm), install an oversize piston pin and recheck clearance. Oversize pin diameter is .8267-.8269" (20.997-21.003 mm).
  3. Determine difference between piston pin diameter and connecting rod small end bore. Interference fit between piston pin and connecting rod must be 0.0005-0.0013" (0.013-0.032 mm).
scientia non olet · About LEMON Manuals