Connecting Rods Specifications

WARNING: This page is about a different variant/trim than selected.

CONNECTING RODS

Application

In. (mm)

Bore Diameter

Crankpin Bore ⁽¹⁾

1.8898-1.8900 (48.000-48.006)

1.8900-1.8902 (48.006-48.012)

1.8902-1.8905 (48.012-48.018)

1.8905-1.8907 (48.018-48.024)

Pin Bore

0.8255-0.8260 (20.968-20.981)

Side Play

Standard

0.006-0.012 (0.15-0.30)

Service Limit

0.016 (0.40)

⁽¹⁾	Big end bore reference number is stamped on side of rod big end split line. Number is size reference and DOES NOT indicate position in engine or cylinder location.