LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1993 >> Integra GS-R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (1.8L 4-CYL) >> Engine Oiling >> Oil Pump >> Reassembly & Installation

Reassembly & Installation

WARNING: This page is about a different variant/trim than selected.
  1. Reassemble oil pump, using Loctite on pump housing screws. Ensure oil pump turns freely. Install dowel pins and new "O" ring into cylinder block. Clean oil pump mating surfaces. Apply Liquid Sealant (08718-0001) to cylinder block mating surface of oil pump.
  2. Apply sealant to threads of inner bolt holes. Install oil pump before sealant dries. Install oil screen and oil pump. Wait at least 30 minutes before filling crankcase with oil. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals