LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1993 >> Integra GS-R >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.7L 4-CYL >> Overhaul >> Piston Pin Installation

Piston Pin Installation

  1. Ensure piston and connecting rod are positioned as shown. See Figure. Turn handle on Piston Pin Driver (07973-PE00320) so piston driver length is 2.035" (51.70 mm).
  2. Install Pilot Collar (07LAF-PR30100) into piston and connecting rod. Lightly oil new piston pin. Place piston onto base. Press in piston pin.
scientia non olet · About LEMON Manuals