LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1992 >> Vigor LS, Standard >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Cranking Test

Cranking Test

  1. Connect a voltmeter and ammeter to battery. See Fig 1. Disconnect connector from distributor.
  2. Use a remote starter switch to crank engine. Check cranking voltage and current draw. Ensure voltage is at least 8 volts. Current draw should be less than 350 amps. Cranking speed should be above 100 RPM.
Fig 1: Connecting Voltmeter & Ammeter For Cranking Test
G29428Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals