LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1992 >> Integra GS-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls - System/Component Tests) >> Relays & Solenoids >> Relays >> Fuel Pump Relay

Fuel Pump Relay

WARNING: This page is about a different car, the 1992 Acura Legend. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove main relay, located at left side of cowl. Check for continuity between relay terminals No. 1 and 3. If continuity exists, replace relay. If continuity does not exist, proceed to the next step. See Fig 1 .
    Fig 1: Main Relay Terminal ID
    G91E16281Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Check for continuity between relay terminals No. 5 and 7. If continuity exists, replace relay. If continuity does not exist, go to next step.
  3. Using a fused jumper wire, connect positive battery terminal to relay terminal No. 4. Connect relay terminal No. 8 to ground. Check for continuity between relay terminals No. 5 and 7. If continuity exists, go to next step. If continuity does not exist, replace relay.
  4. Connect battery positive terminal to relay terminal No. 6. Connect negative battery terminal to relay terminal No. 2. Check for continuity between relay terminals No. 1 and 3. If continuity exists, go to next step. If continuity does not exist, replace relay.
  5. Connect battery positive terminal to relay terminal No. 3. Connect battery negative terminal to relay terminal No. 8. Check for continuity between relay terminals No. 5 and 7. If continuity exists, relay is okay. If continuity does not exist, replace relay.
scientia non olet · About LEMON Manuals