LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1992 >> Integra GS-R >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.7L 4-CYL >> Overhaul >> Piston Pin Removal

Piston Pin Removal

  1. Install Piston Base Head (07HAF-PL20102) and Piston Pin Base Insert (07GAF-PH60300) into Base(07973-6570500). Turn handle on Piston Pin Driver Head (07973-PE00320) so piston driver length is 2.035" (51.70 mm). See Fig 1 .
  2. Insert Piston Driver Shaft (07973-PE00310) into Pilot Collar(07LAF-PR30100). Place piston onto base. Press out piston pin. When removing or installing piston pin, set piston in press with embossed side facing up. Ensure recessed part of piston aligns with lugs on base insert.
Fig 1: Removing Piston Pin
G93E00111Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals