LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1992 >> Integra GS-R >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc >> Bleeding Brake System >> Bleeding Procedures

Bleeding Procedures

CAUTION: Use only clean brake fluid. Ensure no dirt or other foreign matter contaminates brake fluid. DO NOT mix different brands of brake fluid as they may not be compatible. DO NOT spill brake fluid on car as it may damage paint. If brake fluid contacts paint, immediately wash with water.
  1. Reservoir on master cylinder must be full at start of bleeding procedure. With aid of assistant, slowly pump brake pedal several times; then apply steady pressure. Loosen brake bleed screw to allow air to escape from system.
  2. Tighten bleed screw securely. Repeat procedure for each wheel in the following sequence:
    • Right Rear
    • Left Front
    • Left Rear
    • Right Front

Road test vehicle and check brake performance.

scientia non olet · About LEMON Manuals