LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1992 >> Integra GS-R >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Locks - Power >> Testing >> Door Lock Switches

Door Lock Switches

  1. Remove trim plate. Unplug connector. Set switch to unlock position. Check for continuity between terminals No. 1 and 2. Continuity should not exist. Check for continuity between terminals No. 2 and No. 3. Continuity should exist. See Fig 1 .
  2. Set switch to off position. Check for continuity between terminals No. 1 and 2. Continuity should not exist. Check for continuity between terminals No. 2 and No. 3. Continuity should not exist.
  3. Set switch to lock position. Check for continuity between terminals No. 1 and 2. Continuity should exist. Check for continuity between terminals No. 2 and No. 3. Continuity should not exist. Replace switch if continuity is not as specified.
Fig 1: Door Lock Switch Terminal ID
G93G82459Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals