Transaxle Specifications

TRANSAXLE SPECIFICATIONS

Application

In. (mm)

Clutch Clearance

1st Clutch

.026-.033 (.65-.85)

2nd Clutch

.020-.028 (.50-.70)

3rd & 4th Clutches

.016-.024 (.40-.60)

Differential Bearing Side Clearance

⁽¹⁾ .006 (.15)

Differential Pinion Gear Backlash

.002-.006 (.05-.15)

Gear Clearances

Countershaft 2nd Gear Clearance

0-.0016 (0-.040)

Countershaft 3rd Gear Clearance

⁽²⁾

Secondary Shaft 2nd Gear Clearance

0-.003 (0-.08)

Oil Pump Side Clearances

Oil Pump Drive Gear

.0083-.0104 (.210-.265)

Oil Pump Driven Gear

.0014-.0025 (.035-.063)

Oil Pump Thrust Clearance

Standard

.001-.002 (.03-.05)

Wear Limit

.0028 (.070)

Parking Brake Stopper Distance

2.177-2.216 (55.30-56.30)

Secondary Shaft Clearance ⁽³⁾

0-.003 (0-.08)

⁽¹⁾	This is the maximum clearance. Replace snap ring with different thickness snap ring if clearance exceeds specification.

⁽²⁾	Proper procedure must be used when reassembling countershaft to check gear clearance. See COUNTERSHAFT under COMPONENT DISASSEMBLY & REASSEMBLY in this article.

⁽³⁾	Proper procedure must be used when checking secondary shaft clearance. See SECONDARY SHAFT under COMPONENT DISASSEMBLY & REASSEMBLY in this article.