LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1990 >> Integra LS, 2D Hatchback, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specifications & Procedures >> Alignment Procedures >> Caster Inspection (INTEGRA)

Caster Inspection (INTEGRA)

  1. Ensure tire pressure is correct. Position wheels straight ahead. Install camber/caster gauge and Gauge Attachment (07HGK-0010100). Apply front brake. Turn front wheel 20 degrees inward. Turn adjusting screw on caster gauge to position bubble at 0 degrees.
  2. Turn wheel outward 20 degrees and read caster on the gauge with bubble at center of gauge. If readings are not within specification, check for bent or damaged suspension components. See WHEEL ALIGNMENT SPECIFICATIONS .
scientia non olet · About LEMON Manuals