LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1990 >> Integra LS, 2D Hatchback, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specifications & Procedures >> Alignment Procedures >> Camber Inspection

Camber Inspection

  1. Ensure tire pressure is correct. With wheels straight ahead, remove 2 lug nuts and install camber/caster gauge. Ensure gauge is installed parallel to the front hub. On Integra, use Gauge Attachment (07HGK-0010100). On Legend, use Gauge Attachment (07GAK-SD40101).
  2. On all models, read camber on the gauge with bubble at center of gauge. If gauge reading is not within specification, check for bent or damaged suspension components. See WHEEL ALIGNMENT SPECIFICATIONS .
scientia non olet · About LEMON Manuals