LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1990 >> Integra LS, 2D Hatchback, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Brush Holder Test

Brush Holder Test

  1. Ensure no continuity exists between positive and negative brush holders. If continuity exists, replace brush holder assembly. Install brush into brush holder. Ensure brush is in contact with commutator.
  2. Attach a spring scale to brush spring. Measure tension of spring as spring lifts off brush. If spring tension is not within specification, replace armature housing and brush holder assembly. See SPRING TENSION SPECIFICATIONS  table.
SPRING TENSION SPECIFICATIONS

Application Lbs. (Kg)
Integra 3.7-5.3 (1.7-2.4)
scientia non olet · About LEMON Manuals