Warning Light Stays On Test
- If warning light stays on after 3 seconds, ensure LED on control unit is blinking. If LED is not blinking, see ANTI-LOCK WARNING LIGHT STAYS ON in this article. After going through checks under ANTI-LOCK WARNING LIGHT STAYS ON , if warning light is still on, check control unit connector. If okay, check ABS fuse No. 2, White wire between fuse No. 2 and control unit and Yellow/Black wire between fuse No. 17 and fail-safe relays.
- On Integra, check Green wire between fail-safe relays. On Legend, check Yellow/Green wire between fail-safe relays. On all models, check for short in Blue/Red wire between instrument panel and control unit.
- Also check for open in White/Blue wire between alternator and control unit. If problem cannot be found, install a known good control unit and retest.