Front Left Solenoid Or Power Supply
- Ensure ABS fuse No. 1 is okay. Unplug front solenoid connector. Using a DVOM, check resistance between Red and Black wires, and Yellow and Black wires of front solenoid. If resistance is not 1-3 ohms, replace faulty solenoid.
- Disconnect 21-pin connector from control unit. Check for battery voltage between White/Green wire and ground. If battery voltage is not present, repair open circuit between fuse No. 1 and control unit.
- If battery voltage is present, check for continuity between Red/Blue and Yellow/Blue wires to ground. If continuity exists, repair shorted circuit. If no continuity exists, replace control unit.