LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1989 >> Integra LS, 4D Hatchback, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Overhaul >> Valve Body Unit >> Disassembly

Valve Body Unit: Disassembly

  1. Remove 2 bolts holding the valve body to the gear housing. Remove 2 small "O" rings, one large "O" ring and 2 port orifices from gear housing. Remove pinion shaft dust seal from valve body.
  2. Remove 2 valve port retaining bolts. Remove valve port and seal from side of valve body. Pull cut-off valve and spring from valve body. Remove valve body cap, cap seal and dowels from valve body.
  3. Pushing the reaction control valve to one side of valve body, remove roller from reaction control valve. Repeat procedure on other side of valve body to remove opposite roller. Remove control valve seal.
NOTE: To keep plungers from falling out when removing rollers, hold plungers with fingers.
scientia non olet · About LEMON Manuals