Valve Body Unit: Reassembly

Clean all parts before reassembly. Coat plungers, cut-off valve and reaction control valve with ATF. Use new "O" rings and seals. Use grease in the cap seal and port seal grooves to hold seals in place during reassembly. Use grease to hold "O" rings in place during reassembly. To complete reassembly, reverse disassembly procedure.

Fig 1: Integra Power Steering Hydraulic Circuit Diagram

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Legend Power Steering Hydraulic Circuit Diagram

Courtesy of AMERICAN HONDA MOTOR CO., INC.