LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1986 >> Integra LS, 4D Hatchback, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Overhaul >> Gearbox >> Reassembly

Steering System - Power: Overhaul: Gearbox: Reassembly

  1. Grease all bearings and sliding surfaces before reassembly. Using Drift (07749-0010000 ) and Sleeve (07746-0010300 ), drive bearing into gearbox housing. See Figure and Figure .
  2. Install pinion holder into gearbox housing. Install snap ring with tapered side facing out away from gearbox housing and with snap ring ends aligned with flat part of pinion holder.
scientia non olet · About LEMON Manuals