Installing Components Around The Audio Unit
Install:
- the audio unit. Press down so that the catches engage
- the climate control module (CCM) using the 4 screws
- the front panel. Press down so that the catches engage
- the 3 screws
- the connectors.
Check that there is no dirt in the optical connectors.
NOTE:
The bend radius of the optic cables must not be less than 25 mm. Angle in the infotainment/comfort panel with bracket.
HINT: Align the upper section and press it upwards so that the lower section can be worked in.
CAUTION:
Work carefully so that the panels are not damaged.
Install:
- the 2 screws
- the frame
- the gear selector lever panel.