Install the control module on the ABS hydraulic modulator

Fig 1: Locating Pump Motor Connector & Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Center the control module on the ABS hydraulic modulator valves before the valves are pushed into place.

Install: 

• the control module. Tighten to 1.8 Nm 
• the connectors for the pump motor and the control module
• the air cleaner (ACL) housing. See Brake Pipe Master Cylinder/Abs Unit, Replacing
• the integrated relay/fusebox. See Install the integrated relay/fusebox  .

Function test 

See Function test  .