LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2011 >> 4Runner Trail >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Emission Control System (1GR-FE) (Service Information) >> PCV Valve >> Installation >> Installation

PCV Valve: Installation: Installation

  1. INSTALL PCV VALVE SUB-ASSEMBLY 
    1. Apply adhesive to 2 or 3 threads of the PCV valve.

      Adhesive

      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

    2. Install the PCV valve.

      Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf) 

    3. Connect the PCV hose to the valve.
    4. Secure the hose with the clamp.
  2. CONNECT HEATER HOSE 
    1. Connect the heater hose clamp.
  3. INSTALL V-BANK COVER  . Refer to INSTALLATION - Step 9
scientia non olet · About LEMON Manuals