Ventilation Valve: Installation

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL VENTILATION VALVE
1. Install the ventilation valve.
  1. Apply adhesive to 2 or 3 threads.
    Adhesive: Part No. 08833-00070, THREE BOND 1324 or equivalent.
    
    Fig 1: Applying Adhesive To Threads
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the ventilation valve.
  Torque: 27 Nm (275 kgf cm, 20 ft. lbf)
  
  HINT:
  
  After applying the specified torque, rotate the ventilation valve clockwise with the port faced in the direction indicated in Fig 2 .
CONNECT VENTILATION HOSE
INSTALL INTAKE AIR CONNECTOR PIPE (See INSTALLATION )

Fig 2: Rotating Ventilation Valve
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )