Service Limit

WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Make a measurement as follows. If it exceeds the specified service limit, adjust or replace.

NOTE: When making a measurement, vise gearbox by using ST. Never vise gearbox by inserting aluminum plates, etc. between vise and gearbox.

ST 926200000 STAND

Sliding resistance of rack shaft:

Service limit: 304 N (31 kgf, 68 lb) or less

Fig 1: Measuring Sliding Resistance Of Rack Shaft (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Measuring Sliding Resistance Of Rack Shaft (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.