LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Forester Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Component Tests >> Horn Relay

Horn Relay

  1. Remove horn relay. Ensure continuity does not exist between terminals No. 3 and 4. See Fig 1 . Ensure continuity exists between terminals No. 1 and 2. If continuity is as specified, go to next step. If continuity is not as specified, replace horn relay.
  2. Apply battery voltage across relay terminals No. 1 and 2. Continuity should exist between terminals No. 3 and 4. If continuity does not exist, replace horn relay.
Fig 1: Identifying Horn Relay Terminals
G94B46525Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals