LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis (Single Page) >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Repair Instructions >> Sunroof Module Assembly Replacement >> Installation Procedure

Installation Procedure

  1. Install the sunroof sunshade panel to the sunroof module assembly. Refer to Sunroof Sunshade Panel Replacement .
  2. Install the sunroof window to the sunroof module assembly. Refer to Sunroof Window Replacement .
  3. Install the sunroof motor/actuator to the sunroof module assembly. Refer to Sunroof Motor/Actuator Replacement .
    4. Fig 1: Removing/Installing Sunroof Module Assembly Removed
    GM749611Courtesy of GENERAL MOTORS CORP.
  4. Position the sunroof module assembly to the vehicle with an assistant.
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the bolts that retain the sunroof module assembly to the roof panel.

    Tighten:  Tighten the bolts to 10 N.m (7 lb ft).

  6. Connect the drain hoses to the sunroof module assembly. Refer to the following procedures:
    7. Fig 2: Accessing Sunroof Assembly Electrical Connector
    GM749612Courtesy of GENERAL MOTORS CORP.
  7. Connect the sunroof harness electrical connector.
  8. Install the headliner. Refer to Headliner Replacement in Interior Trim.
scientia non olet · About LEMON Manuals