LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> G6 GXP, 4D Sedan >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 3.6L - Repair Instructions >> Repair Instructions >> Plastic Collar Quick Connect Fitting Service >> Installation Procedure

Installation Procedure

    Fig 1: Lubricating Male Pipe End
    GM155425Courtesy of GENERAL MOTORS CORP.
    WARNING: Refer to Fuel Pipe Fitting Warning .
  1. Apply a few drops of clean engine oil to the male connection end.
    2. Fig 2: Pushing Quick-Connect Fittings Together
    GM21855Courtesy of GENERAL MOTORS CORP.
  2. Push both sides of the quick-connect fitting together in order to cause the retaining feature to snap into place.
    3. Fig 3: Ensuring Secure Connection (Plastic Collar)
    GM155399Courtesy of GENERAL MOTORS CORP.
  3. Once installed, pull on both sides of the quick-connect fitting in order to make sure the connection is secure.
scientia non olet · About LEMON Manuals