LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> G8 GT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 6.0L, 6.2L - Introduction >> Repair Instructions >> Fuel Hose/Pipes Replacement - Engine Compartment >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Feed Pipe
    GM1950797Courtesy of GENERAL MOTORS CORP.
  1. Connect the fuel feed pipe (1) from the fuel feed line. Refer to Metal Collar Quick Connect Fitting Service .
    2. Fig 2: Identifying Engine Compartment Fuel Feed Pipe
    GM1950740Courtesy of GENERAL MOTORS CORP.
  2. Install the engine compartment fuel feed pipe (1) at the fuel rail. Refer to Metal Collar Quick Connect Fitting Service .
  3. Install the fuel filler cap.
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 2 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
  5. Install the engine cover. Refer to Engine Cover Replacement .
scientia non olet · About LEMON Manuals