LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Vibe Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Shift Interlock System) >> Repair Instructions >> Shift Lock Control Solenoid Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the front floor console. Refer to Front Floor Console Replacement .
    3. Fig 1: Electrical Connector And Retaining Screw
    GM882531Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector (1).
  4. Remove the retaining screw, then the shift lock control module/shift lock solenoid assembly.
scientia non olet · About LEMON Manuals