LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stabilizer shaft link to the lower control arm.
  2. Install the stabilizer shaft link to lower control arm retaining nut.
    Fig 1: View Of Stabilizer Shaft Link Lower Retaining Nut
    GM731562Courtesy of GENERAL MOTORS CORP.
    3. Fig 2: Removing/Installing Stabilizer Shaft Link Retaining Nut
    GM744320Courtesy of GENERAL MOTORS CORP.
  3. Install the stabilizer shaft link to the stabilizer shaft.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the stabilizer shaft link to stabilizer shaft retaining nut.

    Tighten:  Tighten the nuts to 145 N.m (107 lb ft).

  5. Lower the vehicle.
scientia non olet · About LEMON Manuals