Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Install the horn assembly to the body.

Fig 1: Removing/Installing Horn Assembly
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolt that retains the horn assembly to the body.
Tighten: Tighten the bolt to 10 N.m (88 lb in).
Connect the horn assembly electrical connector.
Install the battery ventilation hose to the battery carrier.