LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2003 >> Bravada AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Fuel Systems >> Fuel Tank >> Assembly

Fuel Tank: Assembly

  1. Install the EVAP canister (3). See EVAP CANISTER . See Figure.
  2. Install the fuel sender assembly (5) to the fuel tank. See FUEL PUMP .
  3. Connect the EVAP vapor pipe to the fill limiter vent valve (4) and the front and rear rollover valve (2, 6). See FUEL LINE DISCONNECT FITTINGS (5.3L) .
  4. Install the EVAP vent valve pipe.
  5. Connect the fuel feed and return pipes to the fuel sender (5). See FUEL LINE DISCONNECT FITTINGS (5.3L) .
  6. Install the fuel feed and return pipes to the retaining clip (7).
  7. Install the fuel filter (8). See FUEL FILTER .
  8. Install the EVAP vent valve (1). See EVAP CANISTER VENT VALVE  under MOTORS, RELAYS & SOLENOIDS.
scientia non olet · About LEMON Manuals