Ventilation Valve: Installation

WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL VENTILATION VALVE SUB-ASSEMBLY
1. Apply adhesive to 2 or 3 threads of the ventilation valve.
  Adhesive:
  
  Part No. 08833-00070, THREE BOND 1342 or equivalent
  
  Fig 1: Installing Ventilation Valve Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a 22 mm deep socket wrench, install the ventilation valve.
  Torque: 19 N.m (194 kgf.cm, 14 ft.lbf)
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (See INSTALLATION )
CHECK FOR ENGINE OIL LEAKS

Fig 2: Installing Ventilation Valve