LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Armada LE, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> DTC P1703 Transmission Control Module (ROM) >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch to "ON". (Do not start engine).
  2. Select "DATA MONITOR" mode for A/T with CONSULT-II.
    Fig 1: CONSULT-II Display Screen
    G00729127Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Start engine.
  4. Run engine for at least 2 consecutive seconds at idle speed.
  5. If DTC is detected, go to "Diagnostic Procedure ".
scientia non olet · About LEMON Manuals