How To Perform Actuator Test

Required Special Tools: 

• MB992744: Vehicle communication interface-Line (V.C.I.-Line)
• MB992745: V.C.I.-Line main harness A (for vehicle with CAN communication)
• MB992747: V.C.I.-Line USB cable short
• MB992748: V.C.I.-Line USB cable long

1. Connect scan tool (M.U.T.-IIISE) to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Select "STV."
4. Select "F.A.S.T./OSS/IMMO/Keyless" from "System List," and press the "OK" button.
5. Choose "Actuator Test."
6. Choose an appropriate item and select the "OK" button.