DTC U010E-00: Communication Error With Dosing Control Unit (DCU)

U010E-00: (BCM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Communication error with dosing control unit (DCU)
Detection condition	The body control module (BCM) cannot receive CAN signal from the dosing control unit (DCU).
Fail-safe	Not applicable
Possible cause	Malfunction in CAN communication line between dosing control unit (DCU) and body control module (BCM) NOTE: Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system. (See MALFUNCTION DIAGNOSIS FLOW [CONTROLLER AREA NETWORK (CAN)] .)
Repeatability verification procedure	Not applicable
System wiring diagram	Not applicable