Diagnostic Procedure

DTC U3000:44 (RADAR UNIT) DIAGNOSTIC PROCEDURE

Step	Inspection		Action
1	VERIFY THAT REPAIRS HAVE BEEN COMPLETED Clear radar unit DTCs using the M-MDS. (See CLEARING DTC (RADAR UNIT) .) Switch the ignition ON (engine on). Perform the radar unit DTC inspection using the M-MDS. (See DTC INSPECTION (RADAR UNIT) .) Is the same DTC present?	Yes	Replace the radar unit, then go to the next step. (See RADAR UNIT REMOVAL/INSTALLATION .)
1		No	Go to the next step.
2	VERIFY THAT NO OTHER DTCs ARE PRESENT Verify other DTCs displayed. Are any other DTCs output?	Yes	Perform the corresponding DTC inspection.
2		No	DTC troubleshooting completed.