LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege5 Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Shift Interlock Systems) >> Component Tests >> Shift Lock Actuator >> Miata

Shift Lock Actuator: Miata

WARNING: This page is about a different variant/trim than selected.
  1. Remove rear console. Remove gearshift lever knob and indicator panel screws. Lift up gearshift lever, selector sleeve and indicator. Disconnect OD OFF switch connector. Ensure gearshift lever is in "P" position.
  2. Turn ignition on. Measure voltage at selected connector terminals. See Figure . If voltage is not as specified, inspect harness and connector. Repair as needed. If harness and connector are okay, replace shift lock actuator. See SHIFT LOCK ACTUATOR  under REMOVAL & INSTALLATION.
  3. Turn ignition off. Check for continuity at selected connector terminals. If continuity is not as specified, inspect harness and connector. Repair as needed. If harness and connector are okay, replace shift lock actuator. See SHIFT LOCK ACTUATOR  under REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals