LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2001 >> B4000 Dual Sport, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Transfer Case (Borg-WARNER 13-54) Electronic Controls) >> Shift Control Module Removal/Installation

Shift Control Module Removal/Installation

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable.
  2. Remove the passenger cowl side trim panel.
    Fig 1: Removing 4WD Control Module
    G01167400Courtesy of MAZDA MOTORS CORP.
  3. Remove the 4WD control module.
    1. Disengage the locking tangs and remove the harness connectors.
    2. Remove the screws.
    3. Remove the 4WD control module.
  4. Install in reverse order of removal.
scientia non olet · About LEMON Manuals